Wood Chips Drying Machine
Capacity
44-268 t/d
Heat Source
Diesel/Gas/Etc.
Customized
Yes
Capacity
44-268 t/d
Heat Source
Diesel/Gas/Etc.
Customized
Yes
Wood chip dryer is special equipment designed and manufactured for the drying of wood chips, sawdust, wood flour, wood chips, and other materials. It has the characteristics of large drying output, significant energy-saving effect, and low maintenance.
Wood chips dryer is an important part of biomass fuel production equipment. By drying wood chips, they can be further pelletized to produce combustible biomass fuel. Sawdust dryer plays a vital role in the recycling of biomass fuel and is of great significance to promote economic development and environmental protection.
Our special design wood chips rotary dryer has a strong adaptability of materials and it can dry various materials. This type of wood chips rotary dryer operation is very simple and liable. Also our professional wood chips rotary dryer has played an important role in various drying industries,wood chips rotary dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy, and chemical.wood chips rotary dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used.
Wood chips rotary dryer is consists of a heating device, feeding device, transport device, discharge device, dust extraction device and other connecting parts. For the installation process, the rotary drum dryer should slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the rotary drum dryer under gravity. Material to be dried enters the rotary drum dryer, and as the rotary drum dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the rotary drum dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the rotary drum dryer, passing through the hot gas stream as it falls.
| Model | Input Capacity（t/h）（t/d） | Water Evaporation (t/h) | Initial Moisture (%) | Final Moisture(%) | Drying Temperature(℃) | Power (kw) | Floor Space (m²) |
| DLSG2010/3 | 4 | 1.4 | 45±5 | 12-15% (Adjustable) | 350±50℃ | 78 | 8m×18m |
| DLSG2210/3 | 4.8 | 1.7 | 85 | 8m×18m | |||
| DLSG2510/3 | 6.2 | 2.2 | 110 | 10m×18m | |||
| DLSG2512/3 | 7.1 | 2.5 | 125 | 10m×22m | |||
| DLSG2912/3 | 9.6 | 3.4 | 135 | 10m×25m |
Selling is not the end. True service has just begun.
We offer free exclusive customized production solutions with dedicated one-on-one technical support. Based on your specific needs, we provide professional layout planning and resolve all your concerns from the very beginning.
Our professional engineers arrive on-site to handle full equipment installation, commissioning, and debugging. We provide hands-on practical training and continuous guidance throughout the process, ensuring your equipment achieves rapid production ramp-up and runs smoothly and efficiently.
We provide a comprehensive one-stop after-sales service, including regular equipment inspections, daily maintenance, troubleshooting, and rapid response to any needs. Our goal is to ensure the long-term, stable, and efficient operation of your equipment.
Capable of carbonizing biomass with moisture content below 20% and particle size under 30mm, suitable for a wide range of common biomass types.
Produces high‑quality carbon with excellent carbonization rate. The resulting carbon products can be used not only as fuel, but also as raw materials for agricultural carbon, metallurgical carbon, and activated carbon.
Strong carbonization depth control capability. The residual volatile matter of the final charcoal can be precisely adjusted between 10‑25% according to different industrial requirements.
Enables adjustable carbonization depth and volatile content to meet varied industrial requirements while maintaining high carbonization efficiency.
From solution design to equipment manufacturing, and on-site installation and commissioning, we deliver comprehensive one-stop services. Our equipment has been successfully exported to over 100 countries and regions, including the UK, Russia, Malaysia, the Philippines, Italy, Israel, Indonesia, Ethiopia, Nigeria, Congo, South Africa, Pakistan, India, Egypt, and many others. We look forward to partnering with you. Below are the project site of our valued clients.
